A settling tank, also known as a vertical settling tank, is a sedimentation tank in which wastewater flows vertically. The flat shape of the tank body is circular or square, and water enters the tank from top to bottom through the inlet pipe located at the center of the tank. Umbrella shaped baffles are installed below the pipe to evenly distribute wastewater in the tank and slowly rise along the entire water flow section. Suspended solids settle in the conical sedimentation hopper at the bottom of the tank, and clarified water flows out from the surrounding overflow weirs around the tank.

A safety device used to prevent the flame of flammable liquid vapors from spreading outward. When designing flame retardant internal components, it is based on the medium of different mixed gases, gas composition, pressure drop, length to diameter ratio, and number of bends to design MESG values and achieve a certain flame retardant speed value with regular fillers. When the flame enters the flame arrester, it is cut into many small flame streams by regular flame blocking elements. Due to heat transfer and wall effect, the incoming gas is cooled, making it unable to reach the ignition temperature. Without the ignition temperature, combustion cannot be formed, ultimately extinguishing the flame flow and achieving the purpose of flame blocking.

Adjust the hot steam to separate different types of steam and lead them to different pipelines. The upper end is the steam inlet and outlet, and the lower end is the drainage outlet. Insulation material must be wrapped around it. The steam drum belongs to the pressure vessel category of special equipment and needs to be regularly inspected.

The shut-off fan is used at the discharge port of the unloader that operates under negative pressure. The upper part receives the material discharged by the shut-off fan and relies on the rotating impeller to transport the material, while also serving as a seal to prevent air from being sucked in from the discharge port during pneumatic conveying, ensuring the normal discharge of the shut-off fan. As a discharge equipment, it plays a significant role in cleaning and cleaning work. The shutdown fan is the main equipment for dust removal, ash discharge, air supply, and other equipment feeding. The shutdown fan is suitable for powdered and granular materials. Widely applied in industrial sectors such as environmental protection, metallurgy, chemical industry, grain, and food.

In the treatment of industrial waste gas, the spray tower sucks the collected waste gas into the washing tower through a fan unit, flows through the filling layer section (the medium for gas/liquid contact reaction), and allows the waste gas to fully contact the liquid (washing solution) flowing on the surface of the filling material to adsorb acidic or alkaline pollutants contained in the waste gas. Then, the clean gas is separated from the contaminated liquid to achieve the purpose of purifying the air.

Feed screw machineThe feed screw machine consists of a shaft and blades arranged along the spiral line on the shaft. Vertical screw conveyors and tubular screw conveyors belong to special screw conveyors. The casing is a circular tube, and the centrifugal force generated by the high-speed rotation of the spiral belt animal material pushes the material towards the wall of the tube, which is then pushed upwards by the blades.